3D printed Sinking Trawler

Sinking Isles class Trawler

It is designed as a wargame model for any WW2 coastal game including Warlord game's Cruel Seas.

You will receive the Sinking model shown in the first picture.

Unpainted 3D printed model of sinking Isle class trawler. This is based upon my Isle Class Trawler. You will get the sinking model and the masts. If you decide to use the second mast you will need to add some sort of base and have it jutting out of the sea. The other pictures are to show the quality of the 3D print process.

I have designed and printed this model myself at 1:300 scale.

Quality

This is a 3D printed model in ABS material. If you are not familiar with 3D printed models please look at the pictures carefully. The printing process works by building the model up in layers which are visible if you get close to it. The small parts such as the air vents and guns tend to loose quality.

Some gamer's prefer to remove these small parts and replace them with there own versions (wire). I, however, decided the model looked fine with them as is.

The printing process involves using a support structure (which I remove for you) which can leave small lumps. I then use an Acetate tank to smooth out the worst of the lines. It is easy to clean the model up even further with a scalp knife however care would need to be taken around the more delicate parts. I choose to not clean my model any more. The unpainted model shown is the quality I used for the painted version.

Having said all that if it is viewed from a short distance ie when playing a game you can not see faults. I have had very favorable comments from all my customers so far.

If you have any doubts about the quality please don't buy. I have tried to show the quality as clearly as possible in the photos.

Print on demand

I only have a small stock and will need to print more out (this can take a day!) if they sell quickly. This might mean a small delay in sending your ship. Please don't buy if you don't want to wait. If there is going to be a delay I will contact you..

Strength

The model itself is very strong and can take a lots of bashing. However, the more delicate parts like the air vents can be easily broken off. Super glues works fine to reattach any thing that does get broken off.

Painting

I find acrylic paint (I use Vallejo paints) takes very well to the ABS material. The painted model had a quick under coat of Vallejo grey airbrush primer (which is the hull colour you can see) then the deck was painted followed by the other detail.

Masts

I provide the masts. These are made in resin (3D printed) in order to improve the quality There is a hole for the mast which go through the hull. 

Postage for multiple items

If you can't get the basket to list the item that you want contact me at:

magpiedesignershop@gmail.com

and I will work out a combined total for you.

Postage to USA

The cost of posting to USA from UK has risen dramatically. It varies according to weight AND value. If it works out at less than I've listed I will refund the difference.

If you want a specific combination of items sending to USA please contact me (see above) and I'll will let you know how much it would cost.